If you own a car then you have probably already had some experience with car leaks, at least to some degree. Even new cars can develop leaks that are both annoying and frustrating. In the 1980s and 1990s engine leaks and other automotive leaking problems were the cause of a large majority of auto service appointments.
Now there are better engineering designs and materials used in the automotive manufacturing process. This has resulted in a decrease in customer complaints because new car parts have been noted to have substantially less problems with leak malfunctions.
Keep Engine Leaks at Bay
For those of you that may be unfamiliar with the basics of engine seals here is a list of what a car engine needs in order to be leak-free.
1. Motor oil
2. Proper compression
3. Fitted gaskets
4. Intact seals
5. Engine coolant
Understanding Engine Seals
Most of the seals that protect your car engine are designed with double lips so that the motor oil can not leak out. One of the seals is designed to contain the oil, and the other is meant to stop any debris from contaminating the oil system. Although these lipped seals do not move they still have a big job to do because the car parts that they are surrounding are in motion. This is why many automotive techs refer to these car accessories as dynamic engine seals.
You will find dynamic seals used on car parts that are either rotating or belt driven. Two examples of these are crankshafts and camshafts. These are crucial elements for your car engine and it only takes a small leak to create a great deal of damage. An oil leak from a camshaft seal can result in ruined valves and timing belts which are both costly repairs.
How Leaks Begin
Small bits of grit, dust and road dirt are always flying about the exterior of auto engines. If there is a small opening in any seal it can allow some of these contaminants to adhere to the inner surface. Then as the shafts are moving they are being abraded by these particles’ sharp edges.
The constant motion of these rotating and belt driven car parts will soon cause small grooves to form along the sides of the shafts. Now the integrity of the seals and shafts are both compromised. Once these irregular grooves have formed on the metal surfaces, leaking will soon follow.
Fixes for Seals
There are times when worn metal Salvage auto parts surfaces can be repaired instead of being replaced. Some mechanics are able to grind and weld the shafts until the surface area meats the necessary specifications. There is also a slip-sleeve that is available for some front crankshafts. This product is a fine metal covering that can be applied to the damaged area and will then cover the grooves. These are both elaborate and high priced technical projects that are only suggested for ultra expensive vehicles. Car parts such as engine seals and shafts can be replaced at a more affordable cost.